Edge Gilded Velvet Laminated Business Cards 450gsm

ARTWORK GUIDELINES

Please ensure that you/your designer follow the artwork guidelines set out in our File Setup Guide. We have also included blank templates below, to help you create your artwork.

BLANK TEMPLATES

85mm X 55mm (UK)

Landscape

Portrait

3.5" X 2" (US)

Landscape

Portrait

90mm x 55mm (EU)

Landscape

Portrait

55mm Square

Templates

Need a quote for professional graphic design? Reach out to us with your design brief for a quote!

DESIGN QUOTE ENQUIRY

DO..

Use full colour designs and solid colour backgrounds and combine with foil stamping to benefit from upmarket metallic foil effects. Silk 450gsm card prints beautifully, so you'll benefit from sharp, crisp imagery and fantastic colour reproduction. These cards are fantastic for combining full colour printing with foil stamping.

DON'T..

Create designs that require close registration of digitally printed elements and foil stamping elements. Make sure you design with a little tolerance for mis-registration between print and foil stamping. Foil stamping is a separate print finishing process carried out after printing, and registration can vary by ±2 mm. This means you should expect the foil stamp element(s) to move around the page by up to ±2 mm. For more information, please see the 'Foil and Ink Registration' tab in our File Setup Guide.

PRODUCTION INFO

TURNAROUND TIMES

The production times quoted on our website are based on typical production schedules and cannot be guaranteed. If you require a product urgently or by a specific date, please contact us before ordering and we will do our upmost to adjust our production schedules and meet your needs. Our ability to meet very tight delivery deadlines is subject to order specifications, quantities, machine requirements, third-party couriers and several other factors that may be beyond our control.

FOIL STAMPING

All foil stamping is carried out in-house at After Hours Creative. We apply foil effects using an etched metal die/plate and a combination of heat and pressure to press the foil in to the card stock. This foil stamping process creates a slight indentation in the card stock during the foil application. The amount of indentation is carried out at the discretion of the foil technician. Too much of an impression can cause the foil to bleed around the edges or create filling in between foil elements. Our priority is always achieving the highest quality foil print.

DEBOSSING

Debossing entails making a subtle indentation into the stock, with the absence of foil (blind debossing) or with foil. Any media produced with debossing is done at the technician's discretion, as too much of a deboss can cause the foil to bleed around the edges and result in a poor quality finish, so we find a balance between quality of print and the level of deboss.

FOIL EDGE GILDING

Foil edge gilding is the application of metallic and satin foil colours to the edges of business cards and invitations. It is synonymous with status and prestige and is a specialised service carried out in-house at our studio. The process involves carefully sanding down the edges of business cards and invitations and then applying foil using a heated roller. The entire process is carried out by hand, which is why edge gilded products have longer production times. Please note that, it's common to lose around 1mm from each edge during the sanding and gilding process.

COLOUR VARIATION

Colour variation is inherent in any printing process, you should expect a 10% colour shift between print runs.

PAPER INFO

All Edge Gilded Velvet Laminated Business Cards 450gsm are printed on authentic 450gsm silk art board. The card is white and printed in full colour with your selected design. Colour reproduction is crisp, with a high quality finish. We offer a vast selection of business cards, these cards can be found in our Laminated Business Cards range.